Have you got too many connected devices connected to WiFi? With our constantly-connected, always-on world, pushing the limits of your WiFi connectivity is a problem for many companies. Indeed, WiFi connectivity problems are a problem for business owners and managers quite often. Laptops, computers, and other equipment connected to the network must be able to share resources and work effectively. However, the limitations of WiFi connections depend on several variables which business owners might not be aware of.
For example, you could be aware that if you connect several laptops, desktops, and mobile phones over the network, it could become difficult for you to stream a video on an LCD monitor in the conference room. Actually, not just its quality is affected but also the download and upload speeds of every device connected with the network. This is because the WiFi network is not equipped with sufficient bandwidth to accommodate the volume of devices, thus straining the network system for all users.
Let’s look at the speed of WiFi and WiFi connections and then see how we can improve them and be more secure.
Use Your Router’s Web Interface
The best method of finding this information is to examine your router’s internet interface. The router is the host of the WiFi network. Therefore it is the most reliable source of information about the devices associated with it. Most top routers allow you to look up the list of connected devices, but some don’t.
The most common tips for accessing your router’s internet interface work. If you’re not sure of the IP address of your router, You can usually search for the gateway IP address of your computer through the Control Panel. You can also execute the ipconfig /all command inside the Command Prompt window.
After that, enter this IP address into the web browser’s address bar and press Enter. This will usually open the interface of your router. If not, consult your router’s manual or conduct an online search with its model number and “web interface” to find the way to connect. If you’re not using a unique password and passphrase, you might need to conduct a search or look through the manual to determine the default passwords that apply to your particular model of router.
See Who Is Connected To WiFi With Your Router
The best solution is to test your router’s wireless. It can be done in a matter of minutes. You don’t need to install any other third-party applications to carry out the check.
The first thing you should have before doing this is the IP address of your wireless router.
How to Find Your Router’s IP Address
To log in to your router’s web interface, you’ll have to open your browser on all of the devices linked to the router. Open a new tab on your browser and enter your router’s IP address in your address bar.
Most routers come with an IP address that is the default: 192.168.0.1 and 192.168.1.1. If you’ve tried entering both into your browser, but neither is working, then you can find your router’s IP address on the back of your router’s wireless.
If you’re still unsure about your router’s IP address, there are additional ways to identify it. Certain are more complex than others.
The easiest way to accomplish the task on Windows is to use Command Prompt. Command Prompt utility. When you start the program, type in the Ipconfig command and press Enter.
There, you’ll see your IP address under the default Gateway.
On Mac, Click on the WiFi icon on the menu bar and select”Open Network Preferences.
If you are in the Network settings, select WiFi from the menu on the left and then click Advanced in the lower-right area of your window.
Select the TCP/IP tab on the following window. You’ll see your IP address in the section called Router.
How to Identify Devices
If you’re looking through the devices on your router’s website interface or scanning them, you may be trying to determine which one is. While looking through this list of devices, it could occasionally be challenging to figure out which device is connected. The description may not inform you what it is; however, you probably do not recognize the MAC address of every device within your office or home.
If you’re having difficulty finding a device that is not yours, One option is to switch off all devices you know about until you can narrow your search to one device left in the network.
If you are still unable to identify the issue, you may change the password of your router and restart your router. In the end, you’ll be able to determine the device that isn’t able to connect. If it’s an intruder on your system, setting the router should hopefully knock the intruders out and eradicate the problem.
Connected Devices & MAC Spoofing
It is also essential to be conscious of MAC Spoofing, where skilled hackers can replicate and “spoof” a MAC address to gain access to networks. Essentially, they’re taking the MAC address from a computer and its place on the network. This could prevent the genuine legitimate device from connecting. The router can prevent multiple MAC addresses.
It’s possible, but it is scarce as few have the expertise and desire to implement this. However, at the very least, be aware of the possibility and read our guide to improving your WiFi network to make it safe for some helpful suggestions that will make your network more difficult to get into from the beginning. Making sure your router and WiFi have solid passwords for login and deactivating WPS are two actions you can take to improve the security of your WiFi network immediately. safer.
The most important thing to remember is that your list of devices that appear on a router or a program is accurate in the majority of instances. In the rare instances when you’ve got a hacker in the vicinity, they could have gotten the gadget’s MAC addresses and are now using your network. In the next section, we’ll discuss how to get rid of these hackers.
Scan Your WiFi Network Using a Dedicated Software
Using third-party software to check your WiFi network and identify suspicious devices is possible. In the beginning, you must install the software on your PC, and it will then scan your WiFi connection and show you an overview of the connected devices currently connected to your network.
There is an abundance of these programs available. We would recommend Glasswire as a freemium application, and Wireless Network Watcher is a no-cost alternative for our readers.
In this article, we’ll explain how to use Wireless Network Watcher to keep watch over your WiFi network.
The primary advantage that comes with the use of Wireless Network Watcher is that it’s free, with no notifications that require users to upgrade. Additionally, you don’t have to install the program on your computer. Instead, you can download it, run it, and it will begin looking through your WiFi network to find active devices.
Is Your WiFi Slowing Down?
If you do, you could benefit from a diagnostic test to identify the source of the network’s interference. Utilizing multiple smartphones and video game systems, laptops, and other gadgets can make it difficult to reach the limits of your WiFi connection. Additionally, you’re at a more significant threat of a security breach when multiple devices are connected to a router. This allows malicious apps and malware to spread over your network.
Don’t let a slow internet connection disrupt your plans. Make sure that all of your devices can access the WiFi connection seamlessly. Speak to EIRE Systems’ IT experts on EIRE Systems to learn about our unique WiFi design services to help you control the security and performance of WiFi networks.
WiFi Doctor-Detect and Boost
If an app that is not useful is running in the background program will close the app to boost the network’s speed to complete a job running in the background. The application is developed for tablets and smartphones that run on Android OS. The primary functions of the WiFi Doctor-Detect and Boost tools are
Its primary features are
WiFi Security Check verifies whether the WiFi you’re connected to is secure.
Enhance the speed of the network: It boosts the speed of networks by detecting and stopping applications that secretly use WiFi or cell information in the background.
WiFi Spy Detection: Check all devices connected to your WiFi hotspot, including Android phones and iPhones/iPads, laptops, and computers.
Super Boost: Super Boost feature prevents applications from re-launching, which will automatically relaunch themselves in the background with no authorization.