Skip to content

How To Unlock Refrigerator Wheels

Wheels for refrigerators, also referred to as appliance casters, help ease the moving of this huge appliance, allowing you to clean it up behind or beneath it. Some appliance moving wheels can be adjusted and used to set your refrigerator at a level. Your refrigerator’s model will decide that you may find non-adjustable refrigerator wheels and adjustable or leveling refrigerator rollers or legs to level.

Before you can replace the wheels of your refrigerator, it is necessary to take off the grille and kickplate at the bottom to gain accessibility to the wheel. The grille may be secured using fast-release screws based on the type of refrigerator. It could also be ripped off by using a pull toward the user. To protect yourself, turn off the electrical connection to the refrigerator before stripping the grille off by disconnection the appliances from power or closing the circuit breaker that provides the electrical power.

Can You Lock Refrigerator Wheels?

Although casters for appliances and rolling wheels are not made to stop them from moving, it can be helpful to use the smallest chunk of timber or a furniture coaster underneath the wheels to keep them from rolling.

You can also make use of the leveling feet accessible by taking off the bottom cover. It is possible to re-level your refrigerator If necessary.

If you’re planning to replace any on the rollers in front, move your refrigerator’s front and after which pull the pin off the rollers, letting it fall away. To replace a roller, place it between the holders, then push the pin into position.

It is important to note that a level refrigerator should have its front of the refrigerator resting on the legs that level it and the front wheels being in touch with the floor. This helps prevent possible cooling issues, leaks, noise problems, and injuries to the appliance.

How To Unlock Refrigerator Wheels

Remove the Base Grille

If screws fix the grille’s base, remove the screws. If not, move it out of its place. The screw for adjusting the leg/roller is hidden behind the grille.

Find The Panel Connecting To The Wheel

If you’re learning to unlock the wheels of a refrigerator, It is crucial to locate the panel that connects it to the lower part of the refrigerator.

The panel will keep the wheels in place while they are locked or unlocked.

Check where the wheels are and look for an attachment screw fixing them. The screw holds the wheels in place, whether tucked away in the freezer or ready to use.

This panel should be simple to find, and the screws should be located near where you’ll find the wheel.

Adjust the Leveling Legs

Utilize pliers or a three-quarter ” wrench for adjusting the screws. The adjusting screws should be turned counterclockwise, which raises the levels of the rollers or legs. The screw that is turned counterclockwise will lower them.

This should allow your appliance to move quickly.

Keep in mind that if your refrigerator is equipped with front leveling legs and rollers, just the legs in front can be adjusted. The front rollers cannot be adjustable.

Important note

Make sure to place the scratch-resistant plastic or cardboard beneath the legs or rollers before shifting the refrigerator. By doing this, you can protect your floor from scratch marks.

If you wish to level your refrigerator, place the rollers, so the appliance is placed against the flooring. The refrigerator’s front should be about a quarter inch higher than its rear. This will let the door shut quickly when opened at less than 90o angle.

Check For Automated Unlocking Mechanism For Wheels

In some instances, refrigerators may have wheels that automatically unlock.

This will ensure that you don’t have to descend and start taking off the panel to allow the wheels out.

This isn’t a typical situation. However, it is something you should look for if you cannot locate the screw.

To activate the automatic feature, you must tilt the refrigerator and attempt the move. The wheels will drop, and it will be simple to move the fridge until it is where it is required to be.

If you’re unsure, read the model manual you have chosen, as every refrigerator is unique regarding this feature.

How do you move a refrigerator using wheels?

Most refrigerators come with rollers or wheels, so moving them shouldn’t be difficult. To be on the safer side, drain the refrigerator remove the water lines and wiring, and defrost the refrigerator should it be needed. The appliance should be moved just a few inches to the left and secured using furniture sliders.

Next, from the fridge’s front, take both sides of the refrigerator and move it sideways as you move it ahead. When you’re happy with the position, please wait for 30 minutes before you use it again. It is advised not to remove your fridge until it’s been lying in its place for at least one day.

If your refrigerator is stuck and you wish to get it moved, begin by taking off the faceplate at the bottom. Place yourself in front of the fridge and push it forward using any heavy objects underneath it. You can then take it out of its position of rest.

What should I wash my fridge off?

How do you get rid of the dirt from your refrigerator quickly and easily?

  • Grilling the grill
  • Cleaning brushes for coils can be employed to clean coils.
  • Clean up any dirt the brush couldn’t get rid of.

Rinse the grill with the tub, and then refrigerate.

Final Thoughts

Here are the steps on how to unlock the refrigerator’s wheels.

To open the refrigerator’s wheels, locate the panel across the lower part of the refrigerator. The panel will include a screw in the place where each wheel is. The screw is turned clockwise to make the wheel looser until it falls. This is the same for all the wheels.

This procedure isn’t time-consuming, and there’s only one screw per wheel.

Continue working to the left and check that the fridge is level when placed on the wheels.

This makes it much simpler to move the refrigerator to where it needs to be without harming anything.

Leave a Reply

Your email address will not be published. Required fields are marked *